Apply Subli Vista Premium DIY Hi-Gloss Sublimation Spray
This Product is specifically designed to allow the transfer of a sublimation image onto a non-sublimation ready surface. Should you require a white layer for vibrancy of the image simply apply Subli Vista White Brilliance Satin Undercoat.
How to Apply
Shake for 30 seconds to activate the product. Spray onto the substrate at 20cm spraying left to right and from top to bottom. Turn the substrate 90 degrees and repeat.
How to Cure
Once sprayed leave the substrate for up to 10 minutes then cure in an oven at 160C or 320F for 20 minutes depending on the thermal properties of the substrate. The product should be allowed to cool before pressing an image onto it.
Clean the Nozzle
After spraying turn the can upside down and depress the nozzle for 3 seconds to clean the nozzle for next use. This step is not required but will prolong the smooth spray life of your aerosol nozzle.
Contact Us
If you are unsure which products are best for your particular project, or you’d like to talk to us about an order for custom items, please contact us using the form below. We aim to reply to you within 24 hours of receiving your message.
Alternatively, you can call or text us on 501 249 4300.
We'd love to hear from you!
Reach Out
Send us an email
[email protected]