Apply Subli Vista Premium DIY Sublimation Adhesion Promoter Liquid

This product is specifically designed to provide a spray receptive layer to hard shiny or hi-gloss surfaces such as metals, ceramics and glass. At a chemistry level this product when applied to the glossy surface will leave behind a layer of molecular binders on the surface. You cannot see these binders, but they are there and will hold the Subli Vista Sublimation sprays on the surface evenly and will not allow them to run. The difference is clear, when using Subli Vista Sublimation Adhesion Promoter you get a perfectly even spray layer on the hi gloss surface you are spraying. An even sublimation surface on which to press an image is very important in providing for an impressive, finished result. 

How to Apply 

Apply to the product surface using a soft, clean, lint free cloth making sure to wipe into the surface evenly. One liberal coat should be enough but if you want more protection wait until dry then simply apply another coat. 

After Applying 

Remove any excess liquid from the surface and allow to air dry for 5 minutes. Once dry spray your chosen Subli Vista product over the prepared surface.