Apply Subli Vista Premium DIY White Brilliance Satin Undercoat Spray
This Product is specifically designed to work with Subli Vista Hi-Goss or Satin Sheen sublimation sprays to add a high-definition satin undercoat layer promoting a white brilliance finish to your sublimated image.
How to Apply
Shake for 30 seconds to activate the product. Spray onto the substrate at 20cm spraying left to right and from top to bottom. Turn the substrate 90 degrees and repeat. Leave for 5 minutes then apply 2 layers of either Hi-Gloss or Satin Sheen coating as above.
How to Cure
After spraying leave for up to 10 minutes then cure in an oven at 160C or 320F for 20 minutes depending on the thermal properties of the substrate. The product should be allowed to cool before pressing an image onto it.
Clean the Nozzle
After spraying turn the can upside down and depress the nozzle for 3 seconds to clean the nozzle for next use. This step is not required but will prolong the life of your aerosol nozzle
Contact Us
If you are unsure which products are best for your particular project, or you’d like to talk to us about an order for custom items, please contact us using the form below. We aim to reply to you within 24 hours of receiving your message.
Alternatively, you can call or text us on 501 249 4300.
We'd love to hear from you!
Reach Out
Send us an email
[email protected]